Dyson DC 33 User Manual download pdf (Page 8)

ASSEMBLY

• Stand the vacuum cleaner up straight and slide the hose into guides at the back

of the vacuum cleaner and click into place.

• Ensure the hose is straight and slide the wand straight down into the hose until it

clicks into place.

• Click the wand handle into the top of the vacuum cleaner. Press the red button

on the rear of the wand handle and slide the tube down. Close the wand cap.

• Attach the tools to the vacuum cleaner and wind the cable anti-clockwise around

cable hooks and secure with clip.

USING YOUR DYSON VACUUM CLEANER

Unwind the cable and insert the plug into a suitable socket. Hold the cleaner

head down with your foot and pull the handle downwards. To switch ‘ON’ or

‘OFF’ press the red power button in front of the handle.

CAUTION:

• Do not allow the vacuum cleaner to be used by anyone who may not be able to

operate it safely.

• The use of an extension cable is not recommended.

• Always switch ‘OFF’ and unplug before performing maintenance on your

vacuum cleaner.

• Ensure the cyclone is secured to the vacuum cleaner. Do not press the cyclone

release button or shake the vacuum cleaner while carrying or it could fall and

cause injury.

• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use with

the cable coiled safely, to prevent tripping hazards.

• Do not use outdoors or on wet surfaces or to vacuum water or other liquids –

electric shock could occur.

• Do not lubricate any parts, or carry out any maintenance or repair work other

than that shown in this manual, or advised by the Dyson Customer Care

Helpline.

PLEASE NOTE:

• This vacuum cleaner is intended for domestic use only. Fine dust such as plaster

dust or flour should only be vacuumed in very small amounts.

• Do not use the vacuum cleaner to pick up sharp hard objects, small toys, pins,

paper clips, etc. They may damage the vacuum cleaner.

• If used in a garage, care should be taken to wipe the soleplate and wheels with

a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could

damage delicate floors.

• Consult your flooring manufacturer’s recommended instructions before

vacuuming and caring for your flooring, rugs, and carpet. Some carpets

will fuzz if a rotating brush bar is used when vacuuming. If this happens,

we recommend vacuuming in hard floors mode and consulting with your

flooring manufacturer.

• When vacuuming, certain carpets may generate small static charges in the clear

bin. These are entirely harmless and are not associated with the mains supply.

To minimise any effect from this, do not put your hand or insert any object into

the clear bin unless you have first emptied it and rinsed it out with cold water.

(See ‘Cleaning the clear bin’ section on page 8).

• Do not use or store this vacuum cleaner below 0°C. Ensure that the vacuum

cleaner is at room temperature before operating.

HARD FLOORS/CARPETS

Ensure the machine is in an upright position before adjusting the setting. The

brush bar will automatically stop if it becomes obstructed. If the brush bar stops

during use, please refer to the ‘Clearing brush bar obstructions’ section (see

pages 4 and 8).

HIGH-REACH CLEANING

CAUTION:

• Switch ‘OFF’ the vacuum cleaner before changing tools.

• Powerful suction can cause the hose to ‘pull back’ - please take care.

• Take extra care when vacuuming on stairs; do not work with the vacuum cleaner

above you on the stairs. Do not put the vacuum cleaner on chairs, tables etc.

• Ensure vacuum cleaner is in upright position before using tools.

PLEASE NOTE:

• To release the wand, open the wand cap and pull the red tube from inside the

handle until it clicks. Press the grey button at the front of the carry handle to

release the wand and hose from the vacuum cleaner. Tools can be attached to

either the hose or wand.

• The brush bar will not rotate when the vacuum cleaner is in an upright position.

• Ensure wand cap is closed when not in use.

EMPTYING THE CLEAR BIN

CAUTION:

• Switch ‘OFF’ the vacuum cleaner and unplug before emptying the clear bin.

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.

• To remove the clear bin from the vacuum cleaner, press the grey button at the

rear of cyclone carrying handle. To release the dirt, press the red bin release

button. Emptying into a bag is recommended for people with asthma and

allergies.

• To minimise dust/allergen contact when emptying, encase the clear bin tightly

in a plastic bag and empty. Remove the clear bin carefully and seal bag tightly,

dispose as normal.

• Do not use the vacuum cleaner without the clear bin in place.

CLEANING THE CLEAR BIN

CAUTION:

To remove the cyclone unit from the clear bin press the red bin release button.

This exposes a small silver button behind the red opening mechanism. Press the

silver button and separate the cyclone unit from the clear bin.

• Clean the clear bin with cold water only.

• Ensure the clear bin is completely dry before replacing.

PLEASE NOTE:

• Do not use detergents, polishes or air fresheners to clean the clear bin.

• Do not put clear bin in a dishwasher.

• Clean the shroud with a cloth or dry brush to remove lint and dust.

WASHING YOUR FILTER

DO THIS EVERY 3 MONTHS

CAUTION:

• Switch ‘OFF’ and unplug the vacuum cleaner before removing the filter.

• Ensure filter is completely dry before refitting to the vacuum cleaner.

PLEASE NOTE:

• It is important to check your filter regularly and wash at least every 3 months

according to instructions, to maintain performance.

• After washing please leave for 24 hours to dry completely.

• The filter may require more frequent washing if vacuuming fine dust.

• Do not use detergents to clean the filter.

• Do not put the filter in a dishwasher, washing machine, tumble dryer, oven,

microwave or near a naked flame.

LOOKING FOR BLOCKAGES

CAUTION:

• Switch ‘OFF’ and unplug the vacuum cleaner before checking for blockages.

Failure to do so could result in personal injury.

• Please ensure the vacuum cleaner is upright and switched off before removing

hose or airway inspection parts.

• Beware of sharp objects when clearing blockages.

• Refit all parts of the vacuum cleaner securely before using.

PLEASE NOTE:

• Clearing blockages is not covered by your vacuum cleaner’s limited guarantee.

• This vacuum cleaner is fitted with an automatically resetting thermal cut-out.

If any part of the vacuum cleaner becomes blocked, it may overheat and

automatically cut-out. Switch ‘OFF’ and unplug the vacuum cleaner and leave to

cool down for 1-2 hours before checking filters or for blockages.

CLEARING BRUSH BAR OBSTRUCTIONS

CAUTION:

• Switch ‘OFF’ and unplug the vacuum cleaner before clearing brush bar

obstructions. Failure to do so could result in personal injury.

• Beware of sharp objects when clearing obstructions.

• Refit all parts of the vacuum cleaner securely before using.

PLEASE NOTE:

• Clearing brush bar obstructions is not covered by your vacuum cleaner’s limited

guarantee.

BRUSH BAR TROUBLESHOOTING

If the brush bar has stopped spinning, follow the steps below. Alternatively contact

the Dyson Customer Care Helpline or visit our website (See page 9).

CAUTION:

• Ensure machine is in reclined position.

• Ensure clutch is turned on (See page 5).

• Check the cleaner head for blockages (i.e. tangled hair, large debris).

• If the brush bar still isn’t spinning, contact the Dyson Customer Care Helpline

or visit our website (See page 9).

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Dyson DC 33 User Manual Page 8

Comments to this Manuals

Related products and manuals for Vacuum cleaners Dyson DC 33